Working on 200W Digital TV Transmitter

Professional Broadcast FM Transmitter 50W series is a profesional FM stereo/Mono broadcasting transmitter. The advanced digital technologies,Digital Signal Processor(DSP), are used in the transmitters to get little size , high performance and high reliability. They are widely used for professional radio stations to transmit high quality FM radio programs. 

More than that, the RS-CM1500W FM transmitter is now gradually showing its high-quality characteristics to the world, especially in the radio station equipment market.

200W Digital TV Transmitter for TV Station

200W Digital Tv Transmitter
1.Working frequency: VHF/UHF
2. Channel bandwidth:8MHz
3. Output power: 200W
4. Output impedance:50Ω
5. Output interface:L27
6. Output load return loss:Normal operation: -32dB, Allowed operation: -20dB
7. Power input level:0dBm
8. Amplifier input impedance:50Ω

 


Overview:
This product is the all solid-state Single-channel TV Transmitter, it adopts professional TV exciter, and it can use the
single/duel exciter configuration, switching automatically.
This transmitter has a variety of linear and non-linear pre-correction function, carrier frequency offset, and precision bias
(with external precision reference source) function.
It can prefabricate and control the half-power output, and it has remote control telemetry interface.
The power amplifier used LDMOS FET, the analog and digital are both compatible, and it used high-quality switch parallel power.
The power amplifier and power supply are both used hot-plug devices.
The power loss and standing wave of the one-time synthesis power combiner is small.
The module of power amplifier display the working parameters in real-time.
The whole machine has the protection of over-current, over temperature, over power and over-standing wave ratio.
The master touch screen displays the working parameters of the whole machine and the module of power amplifier (PA) in real-time.
The 200W transmitter is installed in one 19inch chassis; it’s suitable for medium or small TV station.

 

200W Digital TV Transmitter


Features:
Supported Standards DVB-T,DVB-T2,DVB-H,DTMB,ATSC,ISDB-T
All solid-state digital TV transmitter, bandwidth is 6-8MHZ.
Pre-distortion correction, dual-exciters switch automatically.
High Linearity LDMOS Power Amplifier, high-gain power amplifier module, parallel switching power supply, it is a high-efficiency
transmitter.
Telemetry and remote control by computer, web-based interface and software.
Good man-machine interface, full automatic switch the machine with one key.
Multi protection (over voltage, over current, overheating, large standing-wave ratio ...)high reliability, 24 hours continuous
works.

Back to blog