Working on 50W Cable Broadcast Radio Transmitter

50W Cable Broadcast Radio Transmitter series is a profesional FM stereo/Mono broadcasting transmitter. The advanced digital technologies,Digital Signal Processor(DSP), are used in the transmitters to get little size , high performance and high reliability. They are widely used for professional radio stations to transmit high quality FM radio programs. 

More than that, the RS-CM1500W FM transmitter is now gradually showing its high-quality characteristics to the world, especially in the radio station equipment market.

This Fm Stereo Transmitter, using advance modulation system and Phase Lock Loop to control a steady frequency when transmitting.

New invented low noise system is used to reduce the noise level during broadcasting time. A digital stereo system is used andcontrol the stereo separation at great condition. with a high gain antenna, it can easy broadcast anywhere you want, home, apartment, church, school, club, camping, backyard, resident village. This Broadcast Package is plug and Play design, very easy to use, as you could see it at instant. so you really could enjoy the stereo transmitter!

The transmission range depends on many factors. The true distance is based on the antenna installing height, antenna gain, using environment like building and other obstructions, sensitivity of the receiver, antenna of the receiver. Installing antenna more high and using in the countryside, the distance will much more far.

50W FM Transmitter


· Hearing similar to CD

· All-digital technologies DSP+DDS

· Built-in audio signal limiter

· Analog and Digital (AES/EBU) audio signal input directly.

· AGC circuit can keep the Output Power stability.

· Big LCD display all the parameters in real time.

· Communication Interface by RS232 for remote

· Five kinds of protections for the security

· Compact structure

Equipments included


1. Frequency Range 87.5MHz~108 MHz
2. Frequency Setting step 10KHz
3. Carrier Frequency precision ±200Hz
4. Residual Wave Radiation ≥65dBc
5. Audio Input Impedance 600Ω,Balance
6. Separation 60dB Pilot Signal Modulation
7. Audio Input Level ±10dBm,step 0.01dB
8. S/N ≥75dB(30H~15kHz,100%)
9. Audio Harmonic Distortion <0.05%
10. Audio response ±0.05dB(30Hz~15KHz)
11. Output Load Impedance 50Ω
12. Output Power 50W
13. Pre-emphasis 0μS,50μS,75μS
14. Deviation ±75kHz
15. Pilot Frequency 19 kHz±1Hz
16. Sub-carrier Suppression ≥65dB
17.RF Output Connector 7/16'(female)or7/8'Flange
18.Size 460mm*480mm*88mm
19.Weight 7KG
20.Pilot Signal Modulation 8%~10%



50w 350w 4




1). Community Radio stations
2). LPFM radio stations
3). City radio stations
4). Christian Church radio stations

Warranty: 6 years for all transmitters in our factory.


1) OVERHEAT PROTECTION: The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range.

2) OVER SWR PROTECTION: SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile.

3) FAN ERROR ALARM When the fan stops running, the alarm message will be displayed on the screen.

4) ADJUSTABLE POWER OUTPUT The RF out of this 50W FM Transmitter is continuously adjustable from 0-50 watt at the stepping of 0.1watt, which means you can tune it to 1w, 1.1w, 1.2w...50w, with just one transmitter you’ll get multiple modes of outputs and easy to tune as per your needs

Back to blog